Clean It, Clean It Real Good! A Pressurized Look at How Water Pressure Cleaners Really Work

Justin GravesUncategorized

water pressure cleaners

Whether it’s your first time using a water pressure cleaner or you’ve only seen them in action on TV, your first response is likely to be a combination of amazement and curiosity.

The instant effect of water pressure cleaners on the removal of grime and dirt that has stubbornly remained on your property for years is immensely satisfying. It also leads to plenty of questions about how this technology actually works.

If you’re wondering how to pressure washer properly and how these pieces of tech actually work, read on to find out. 

Water Pressure Cleaners: The Basics 

Essentially a high-pressure cleaner works simply by blasting large volumes of water at a surface with such force that all of the surface grime is forcibly removed. They shoot water jets at a pressure and speed approximately 75 times that of a standard garden hose.

You simply connect the washer to a water source (usually a garden hose) and the machine does the rest. It uses a narrow spout to increase pressure, allowing it to hit the surface with an extremely high level of kinetic energy, which is enough to dislodge any dirt.

Since the only ingredient is water, even this strong force isn’t enough to actually damage the surface, only to remove things that shouldn’t be there. 

What is a Water Pressure Cleaner Made Up Of? 

There are numerous parts of water pressure cleaners that allow them to do their job. These are: 

  • The hose – As you may have guessed, this is the big tube attached to the cleaner. A regular hose does not have the capability to handle such high-pressures of water. The hose on a water pressure cleaner is often reinforced with wire mesh and several layers of high-density plastic. 
  • The electric motor – The electric motor inside the pressure cleaner exists to power the water pump. Only a fuel-powered engine has the ability to generate the pressure needed to operate a high-pressure cleaner. Some cleaners are powered by gasoline engines instead of electric motors.
  • The water pump – The water pump is the mechanism that allows the whole thing to work. The best water pressure pump can pump water through the cleaner at a rate of about 4-6 gallons per minute. 
  • The water inlet – This is simply the hose that will keep your washer connected to the water supply. It will have a filter to stop debris and dirt getting into the washer, as this could be dangerous when shot out at high speeds.
  • The handle – A pressure washer handle allows you to safely carry and use it without feeling the strain. They will have reinforced structures and comfortable grips.

Terms You Need to Know 

The term you’ll hear thrown about most often when it comes to water pressure cleaners is PSI. This means Pounds Per Square Inch. It’s a measure of water output and pressure. 

Another term you might hear a lot is GPM, which means Gallons Per Minute. This is just a measure of the water flow to the hose and means much the same thing as PSI.

Learn More 

To learn more about how water pressure cleaners really work an what they can do for you, don’t hesitate to get in touch with us today. Understanding technology is the key to using it effectively.